Adeunis RF ARF33-PRO Instrucciones Para El Uso página 43

R/W S231
IMPORTANT NOTES
«ERROR_1»: message returned when a user inserts an unauthorised value for the S200 register (in the light of
current regulations).
«WARNING_1»: message returned when a user inserts an authorised value for the S200 register, but the
content of the S231 register is not compatible with the maximum power permitted for the channel selected. As
a consequence, the S231 register is automatically updated with the maximum permitted value for the channel
selected.
«WARNING_2»: message returned when a user inserts a value that is available but not authorised for the S231
register (in the light of the maximum permitted power for the channel selected). As a consequence, the S231
register is automatically updated with the maximum permitted value for the channel selected.
Users must use the «AT&W» command if they wish to save the update.
«WARNING_3» : cf note 6
Type
Serial link
R/W
R/W
R/W
R/W
R/W
R/W
R/W
208210A_UG_V1.6_ARFx3-PRO
RF exit level
Register Function
S210 Transmission rate
S211 Data length
S212 Parity
S213 Stop bits
S214 Timeout command
S215 Type of interface
S216 Handshake
Adjusts the RF exit level
53-PRO 43-PRO
0 14dBm 10dBm
1 20dBm 14dBm
2 24dBm 17dBm
3 27dBm
Description
Transmission rate of the serial link
in bits/s
«0»: 600
«1»: 1200
«2»: 2400
«3»: 4800
«4»: 9600
«5»: 19200
«6»: 38400
«7»: 57600
«7»: 7 bits
«8»: 8 bits
«1»: none
«2»: even
«3»: odd
«1»: 1 stop bit
«2»: 2 stop bits
Length of timeout for detecting ***,
in ms from 3 to 240
«0»: RS232 only
«1»: RS232 or RS485 (DE/RE
lines managed)
«0» : hardware, RTS (limited to the
addressed protocol)
«2»: none
27/24dBm for the
ARF53-Pro
33-PRO
(note: USB versions are
10dBm
set to 24dBm in order
to limit the current to
450mA)
17bBm for the
ARF43-PRO
Default value
4
8
1
1
3
1
GB
Note
1.2 & 5
5
5
5
1
42