Pairing Light Switch With Fan; Pairing Your Bluetooth Device To The Speaker; Bluetooth ® Speaker And Fan Operation - Home NetWerks 7130-02-BT Manual Del Usuario

BLUETOOTH SPEAKER FAN GRILLE INSTALLATION
2. Attach grille by pinching mounting springs
and insert into narrow rectangular slots in
the fan housing.
Turn on power source.

PAIRING LIGHT SWITCH WITH FAN

This is a one-time pairing to be done after turning on the power source.
1. Turn switch to on ON. The white LED light on the fan should be on. NOTE: the other functions on
the light switch will not be working until the end of this section.
2. Cycle the switch ON & OFF five times until the blue LED night light on the fan is flashing. Pause
one second between each cycle.
3. While the Blue LED night light is flashing, press any of the top three setting buttons on the switch –
NIGHT LIGHT, LIGHT or FAN.
4. Blue LED night light will stop flashing. The switch is now paired with fan. All four setting buttons
on the switch should now be functional.
5. Any combination of settings can be achieved by individually pressing each setting button, except
LED light and night light.
EG: LIGHT and FAN will turn on the exhaust fan and LED light.
EG: LIGHT and MUSIC will turn on LED light and Bluetooth speaker.
Should you ever lose pairing between the switch and fan, repeat steps 2-4.
PAIRING YOUR BLUETOOTH
1. To play your personal music files, you need a wireless BLUETOOTH
2. Set your device to a midrange volume before connecting to the speaker.
3. Follow the instructions that came with your BLUETOOTH
to search for other BLUETOOTH
Identification Number).
4. From the Home screen, choose Settings > BLUETOOTH
speaker.
Note: While your device can maintain multiple pairing records, it can only connect to one accessory
at a time. This prevents your device from sending your data to the wrong BLUETOOTH
5. Choose the Homewerks
6. When pairing is complete, you can use the BLUETOOTH
7. Optimal volume setting for the BLUETOOTH
may cause sound distortion.
DEVICE TO THE SPEAKER
®
accessories. This may involve entering a passkey or PIN (Personal
®
speaker, and then enter a passkey or PIN (0000) if prompted.
®
2
device to make it discoverable or to set it
®
, the device searches for Homewerks
®
speaker to play audio with your device.
®
speaker is 70% or lower. Settings higher than 70%
®
10
device.
®
accessory.
®
www.homewerksww.com
®