Existing Construction Assembly Instructions - Home NetWerks 7130-02-BT Manual Del Usuario

ASSEMBLY INSTRUCTIONS
5. Secure the suspension bracket I (C) to fan
housing using short machine screw (BB)
(included).
6. Remove junction box cover. As shown in wiring
diagram on page 5, using quick connect ports
connect house wires to switch and fan.
Note: Do not use metal wall plate with the
switch, as it may cause interference with the
fan operation.
7. Connect a 4 in. circular duct and vent to the
outside. Secure it with duct tape or clamp.
Turn on power source.
EXISTING CONSTRUCTION – ACCESSIBLE
FROM ABOVE
BEFORE INSTALLATION
Turn off power source. Review all safety
precautions.
1. Remove existing fan.
www.homewerksww.com
5
6
7
1
7
Wall
Green
Wall switch
switch wire
back view
NIGHT LIGHT
Red
wire
White
wire
Black
wire