Installation Instructions - e-conolight ECONOLED Instrucciones De Instalación

Cut LED Cable
Cut the LED Cable strip to your desired length as indicated by the cut mark every 1.181 inches. Make sure to match polarity.
Install Power Supply
To select the correct power supply, determine the length of LED Cable needed.
Install Inline On/Off Dimmer Switch (optional)
Connect Inline On/Off Dimmer Switch
The Inline Dimmer Switch goes between the Power Supply (PS) Link Connector and the Power Supply.
Unplug the Power Supply from the AC outlet before connecting. Match the icons on the PS Link Connector with the icons on the Inline Dimmer.
IMPORTANT
!
The Inline Dimmer can dim up to 90 Watts.
Mount Inline On/Off Dimmer Switch
The Inline Dimmer uses a keyhole mounting system designed to be mounted vertically.
(A) Screw partially into surface, leaving 1/4
inch to hang the Inline Dimmer. M2.9 (#4)
screw is recommended, provided by others.
IMPORTANT
!
Disconnect the Inline Dimmer from Power Supply before mounting.
Max Cable High
Wattage
Output
E-EDA15 5 feet
E-EDA30
10 feet
E-EDA60 15 feet
E-EDA90 30 feet*
* Cables must be connected in parallel of at
least two half pieces or more.
w w w . e - c o n o l i g h t . c o m | s a l e s @ e - c o n o l i g h t . c o m | 8 8 8 . 2 4 3 . 9 4 4 5

Installation Instructions

Connect to Power
Matching the icons on the connectors, connect the Power Supply (PS) Link
Connector to the Power Supply. Plug the power supply into the AC outlet.
IMPORTANT
!
Connect the power supply to the PS Link Connector BEFORE
plugging the power supply into the AC outlet.
Power Button: On/Off
Light Bar Indicator :
Level 5 (max) (shown)
Level 4
Level 3
Level 2
Level 1 (min)
Dimming Bar :
Power Button: On/Off
+: Increase light level
Light Bar Indicator :
- : Decrease light level
Level 5 (max) (shown)
Level 4
Level 3
Level 2
Level 1 (min)
Dimming Bar :
+: Increase light level
- : Decrease light level
(B) Fit center of keyhole in back of Inline
Dimmer over screw and slide down to mount.
Power Button: On/Off
Light Bar Indicator :
Level 5 (max) (shown)
Level 4
Level 3
Level 2
Level 1 (min)
Dimming Bar :
+: Increase light level
- : Decrease light level