Installing The Escutcheon - Kenwood DNX6140 Manual De Instrucciones

Installing the Microphone Unit
(DNX6140/DNX6000EX/DDX5034BT only)
1. Check the installation position of the microphone
(accessory 9).
2. Remove oil and other dirt from the installation
surface.
3. Install the microphone.
4. Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Accessory 9
Fix a cable with a commercial
item of tape.

Installing the Escutcheon

1. Attach accessory 5 to the unit.
Accessory 5
Peel the release coated paper of double-face adhesive tape
to fix on the place shown above.
Adjust the direction of the microphone to the driver.
Install the microphone as far as possible
from the cell-phone.
|
9
English