Operating The Espresso Machine; Preheating - KitchenAid Nespresso my machine KES0503 Manual De Instrucciones

ASSEMBLING THE ESPRESSO MACHINE
Fill the water tank with fresh, cold,
6
drinking water (the water level should
be at or below the "max" fill line).
NOTE: Press water tank in until it snaps completely into place to assure proper function.
Before brewing espresso for the first
8
time, make sure to run plain water
through the Espresso Machine, on the
"lungo" setting three times.

OPERATING THE ESPRESSO MACHINE

Preheating

When the Espresso Machine is turned
1
on, the LED will flash as it warms up.
When the machine is ready, the LED
will glow continuously.
10
7
x 3
NOTE: You can change your desired
volume selection while the Espresso
Machine is heating up. When you do
this, the LED bar will no longer flash,
but remains lit over the selected
portion size and the brew button
continues to flash while the Espresso
Machine heats up. Press the brew button.
Once the correct temperature is reached,
the brew cycle will start on its own.
Place the water tank back on the
Espresso Machine.