Tabla de contenido
Publicidad
WSS setting
Theft protection setting
Video signal info
PIP HW correction
WSS setting
WSS
On
Some TV broadcasters transmit a picture format identifi cation, enabling the TV to
switch to the proper format automatically when WSS is On. When WSS is On,
detection is carried out on all picture sources, i.e.
TV tuner, satellite tuner and video/DVD playback.
Under certain conditions, e.g. a poor signal-to-noise ratio, the detection may fail,
which may entail faulty format switching. WSS may therefore be set to "Off".
WSS may also be set to "Broadcast only", which means that detection is carried
out only on signals from the TV tuner and the satellite tuner.
Some broadcasters do not send a "WSS Off" signal when one program is fi nished
and another begins. When the "WSS signal" disappears, then the format will
return to the default.
- In this menu it is possible to enable (ON) or disable (OFF) theft protection. It is only
possible to enter this menu if no pin code is set for the Avant 32 DVD.
- In this menu the signal/noise ratio of the tuner input is displayed. The higher the
signal/noise ratio the lower the fi gure.
- Default set to OFF, but if there is a problem with the colours in the PIP picture it
can be set to ON (especially when mixing two TV systems, for example PAL and
SECAM).
Repair tips, English
5.13
Publicidad
Tabla de contenido
