Longshine LCS-8131N Manual Del Usario página 18

3. Select an encryption type and fill in the corresponding wireless network
information:
Authentication Type There are 7 types of authentication modes supported by
Encryption Type
802.1x
WPA Pre-shared Key This is the shared secret between AP and STA. For WPA-PSK
WEP Key
4. Specify the 802.1x information if you are using the 802.1X certification method.
Users that don't use this function or connecting to an open-wireless network
please skip this part.
EAP method
Tunnel Authentication
Session Resumption
Utility including open, Shared, LEAP, WPA and WPA-PSK,
WPA2 and WPA2-PSK
For open and shared authentication mode, the selection of
encryption type are None and WEP. For WPA, WPA2,
WPA-PSK and WPA2-PSK
encryption type supports both TKIP and AES.
Use 802.1x to make WPA and WPA2 certification. This
functions only works when connecting to a WPA and WPA2
supported device.
and WPA2-PSK authentication mode, this field must be filled
with character longer than 8 and less than 32 length.
Only valid when using WEP encryption algorithm. The key
must matched AP's key.
To select an EAP method.
Select a Tunnel authentication mode.
Select to enable this function or unmark it to disable.
17
authentication mode, the