Longshine LCS-8131N Manual Del Usario página 31

WPS Configuration
This page provides users to connect this adapter to a WPS (Wi-Fi Protected Setup)
AP. Those available WPS supported AP are listed on the upper column. Select the AP
that you want to connect to and click the Connect button to activate.
WPS Associate IE:
If the "WPS Associate IE" option is checked, station sends a association request with
WPS IE during WPS setup.
WPS Probe IE:
If the "WPS Probe IE" option is checked, station probes a request with WPS IE during
WPS setup.
Re-scanning:
Click the rescan button to perform the re-scanning.
WPS AP Information:
Click the "WPS information" button to bring up the WPS capable AP information
dialog window. The window shows the information including:
Authentication Type:
There are three types of supported authentication modes including Open, Shared,
WPA-PSK and WPA modes.
Encryption Type:
For Open and Shared authentication modes, the available encryption types are
None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication modes,
the available encryption types are TKIP and AES.
Config Methods:
This attribute contains the config methods supported and enabled by the selected
Registrar.
30