Safety Information; Safety Warnings; Preliminary Recommendations; General Information - WEG CFW500 Guía De Instalación, Configuración Y Operación

1 SAFETY INFORMATION

1.1 SAFETY WARNINGS

NOTE!
This guide contains important information
„
fo r th e c o r re c t u n d e r sta n d i n g a n d
proper operation of the CFW500-CUSB
Communication Plug-in Module.
O n l y u s e t h e C F W 5 0 0 - C U S B
„
C o m m u n i c a ti o n P l u g - i n M o d u l e i n
CFW500 WEG inverters.
We recommend reading the CFW500
„
user's manual before installing or operating
this accessory.

1.2 PRELIMINARY RECOMMENDATIONS

ATTENTION!
Always disconnect the general power
„
supply before connecting or disconnecting
the accessories of the frequency inverter
CFW500.
Wait for at least 10 minutes to guarantee
„
complete de-energization of the inverter.

2 GENERAL INFORMATION

This guide shows how tho install, configure and operate
the CFW500-CUSB Communication Plug-in Module.
This plug-in allow to the CFW500 an interface with PC
by Universal Serial Bus (USB) trough of an embedded
standard USB/UART converter (VCP- Virtual Com
Por t.). The CF W500-CUSB allows the PC serial
communications for inverter commands, references
and variables monitoring, as well as SoftPLc debugging
and programming. For further information about this
refer to the CFW500 "Modbus RTU user's manual' and
"SoftPLC manual" in the CD-ROM.
USB Communication Plug-in Module
CFW500 | 5