Cleaning Instructions - Weston 36-0801-W Manual De Instrucciones

IMPORTANT NOTE PRIOR TO USE
A protective coating is applied to this unit prior to shipment. This coating
protects the unit in shipment and during its shelf life.
It is very important to thoroughly clean the unit before using it, especially
around the edges or areas that have been soldered or welded. Completely
disassemble and thoroughly clean all parts with hot water, dish detergent and
a soft cloth. Rinse with clean water and dry thoroughly. DO NOT use any
harsh or abrasive brushes, chemicals or detergents. Avoid using detergents or
cleansers containing high percentages of free alkali or acid.
DO NOT clean any parts of this unit in a dishwasher.
Coat all metal parts with a food grade silicone spray after cleaning and before
storing.
Be certain to store the unit in the original box in a cool, dry location.
Run a small "Test Batch" through the unit before initial use.

CLEANING INSTRUCTIONS

. PROPERLY CLEAN THE GRINDER PRIOR TO INITIAL USE!
. Disassemble the Grinder and hand wash each part thoroughly in warm, soapy
water, taking particular care to remove all grease and oil from the surfaces.
. Dry all parts thoroughly before re-assembling. DO NOT ALLOW parts to air dry.
. Coat all metal parts, including the Plates and Knife, with a food grade silicone
spray to prevent corrosion.
. The Grinder is NOT dishwasher safe.
SPECIAL NOTE FOR #32 GRINDERS ONLY: If the Front Ring Nut is
difficult to remove, the Handle is designed with a small hole drilled into
the back, which allows it to be used as a wrench to remove the Front
Ring Nut only. DO NOT use this feature to tighten the Front Ring Nut.
CAUTION! It is important to follow the "Food Safety" guidelines outlined
in this manual. For the most up to date instruction visit the USDA website.
6