Makita HR2475 Manual De Instrucciones página 6

Side handle (auxiliary handle)
1
2
3
4
5
010161
Always use the side grip to ensure operating safety.
Install the side grip so that the teeth on the grip fit in
between the protrusions on the tool barrel. Then tighten
the grip by turning clockwise at the desired position. It
may be swung 360° so as to be secured at any position.
Bit grease
Coat the bit shank head beforehand with a small amount
of bit grease (about 0.5 -1 g; 0.02 - 0.04 oz.). This chuck
lubrication assures smooth action and longer service
life.
Installing or removing the bit
1
009664
Clean the bit shank and apply bit grease before installing
the bit.
Insert the bit into the tool. Turn the bit and push it in until
it engages.
After installing, always make sure that the bit is securely
held in place by trying to pull it out.
1
2
010162
To remove the bit, pull the chuck cover down all the way
and pull the bit out.
All manuals and user guides at all-guides.com
1. Grip base
2. Tighten
3. Loosen
4. Teeth
5. Side grip
6. Protrusion
6
1. Bit shank
2. Bit grease
2
1. Bit
2. Chuck cover
1
010163
Bit angle (when chipping, scaling or
demolishing)
1
2
010164
The bit can be secured at the desired angle. To change
the bit angle, depress the lock button and rotate the
action mode changing knob to the O symbol. Turn the bit
to the desired angle.
Depress the lock button and rotate the action mode
changing knob to the
the bit is securely held in place by turning it slightly.
010165
Depth gauge
1
010166
The depth gauge is convenient for drilling holes of
uniform depth. Loosen the side grip and insert the depth
6
1. Bit
2. Chuck cover
2
1. Action mode
changing knob
2. Lock button
symbol. Then make sure that
1. Depth gauge