Optional Accessories - Makita HR2475 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Use the optional drill chuck assembly. When installing it,
refer to "Installing or removing the bit" described on the
previous page.
Set the action mode changing knob to the
You can drill up to 13 mm(1/2") diameter in metal and up
to 32 mm(1-1/4") diameter in wood.
CAUTION:
Never use "rotation with hammering" when the drill
chuck assembly is installed on the tool. The drill
chuck assembly may be damaged.
Also, the drill chuck will come off when reversing
the tool.
Pressing excessively on the tool will not speed up
the drilling. In fact, this excessive pressure will only
serve to damage the tip of your bit, decrease the
tool performance and shorten the service life of the
tool.
There is a tremendous twisting force exerted on
the tool/bit at the time of hole breakthrough. Hold
the tool firmly and exert care when the bit begins to
break through the workpiece.
A stuck bit can be removed simply by setting the
reversing switch to reverse rotation in order to back
out. However, the tool may back out abruptly if you
do not hold it firmly.
Always secure small workpieces in a vise or similar
hold-down device.
When performing diamond core drilling operations,
always set the change lever to the
use "rotation only" action. If performing diamond
core drilling operations using "rotation with
hammering" action, the diamond core bit may be
damaged.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
the like. Discoloration, deformation or cracks may
result.
To maintain product SAFETY and RELIABILITY, repairs,
carbon brush inspection and replacement, any other
maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always
using Makita replacement parts.
All manuals and user guides at all-guides.com

OPTIONAL ACCESSORIES

symbol.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
position to
NOTE:
8
CAUTION:
These
accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
Only use
attachment for its stated purpose.
SDS Plus Carbide-tipped bits
Drill chuck assembly
Drill chuck S13
Chuck adapter
Chuck key S13
Bit grease
Depth gauge
Blow-out bulb
Dust cup
Dust extractor attachment
Safety goggle
Plastic carrying case
Core bit
Side grip
Bull point
Cold chisel
Scaling chisel
Grooving chisel
Scraper
Keyless drill chuck
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
or
attachments
are
accessory or

Publicidad

Tabla de contenido
loading

Tabla de contenido