Marq FOG400LED Guia Del Usuario página 3

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

User Guide (English)
Introduction
Box Contents
Fog 400 LED
Power Cable
Remote Control (wired)
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit marqlighting.com.
For additional product support, visit marqlighting.com/support.
Safety Notes
Important: In addition to the notes throughout this manual, please refer to the included safety &
warranty manual for additional safety information.
Carry this product by the handles only. Do not shake it.
Use this product indoors only. To prevent risk of fire or shock, do not expose this product to rain
or direct and excessive moisture.
If the environment is significantly colder than the temperature of this product, you may need to
wait for it to adjust to the ambient temperature when you power it on.
Do not use this product for permanent installations.
Connect this product to grounded and protected circuits only.
Always disconnect it from its power source before cleaning it or replacing the fuse. Replace the
fuse with another of the same type and rating.
Do not clean it with solvents or harsh detergents. Use a soft, clean cloth.
Before connecting the product to a power source, make sure the power cable is not crimped or
damaged.
Make sure the power outlet's voltage is within the range stated on this product (on its housing or
decal).
Never disconnect this product from the power cable by pulling or tugging on the cable itself.
Always make sure this product is used in a location with adequate ventilation with at least 20"
(50cm) from adjacent surfaces. Make sure none of this product's ventilation slots are obstructed.
Do not use this product at ambient temperatures higher than 104 °F / 40 °C.
Do not allow flammable materials near this product during use.
Do not touch this product while it is powered on or immediately after powering it off. The product
and its housing can reach high temperatures.
If you encounter a serious problem while using this product, stop using it immediately.
Do not open this product's housing. It contains no user-serviceable parts and will void your
warranty.
User Guide
Safety & Warranty Manual
3

Publicidad

Tabla de contenido
loading

Productos relacionados para Marq FOG400LED

Tabla de contenido