Acoustic Signal; Data Transfer - LaserLiner DigiLevel Pro 40 Manual Del Usuario

DigiLevel Pro 40/60/80/100/120
6
Changing the angle reference value
With button (2), it is possible to transfer angles elsewhere.
To do so, set the device to the desired slope and press button (2).
The display then changes to „0.00°", „REF" appears on the display
and the required reference angle is set. The slope can now be
transferred to other objects.
Press button (2) again to deactivate the angle reference.
7
Gradient function
Preset gradients of 1%, 2%, 3% and 4% can be set using
the button (3). Keep pressing the button until the required value
is displayed. The gradient function is switched off by pressing and hol-
ding button (3).
8

Acoustic signal

The acoustic signal can be switched on or off with button (6).
When the angle of slope stands at 0°, 45°, 90° or the most recently
stored value, this is indicated by an acoustic signal.
!
When working with a changed angle reference value,
the acoustic signal is activated on reaching the new reference
value (0°, 45°, 90° display).
AUTO OFF function
In order to preserve the batteries, the measuring device switches off
automatically if it is left idle for 10 minutes. Backlighting switches
off after 1 minute.

Data transfer

The device features a Bluetooth
wireless data transfer to mobile devices with a Bluetooth
interface (such as a smartphone or tablet).
The system prerequisites for a Bluetooth
specified at http://laserliner.com/info?an=ble
The device can set up a Bluetooth
Bluetooth 4.0 compatible devices.
The range is set to a maximum distance of 10 m from the terminal
device and greatly depends on the ambient conditions such as the
thickness and composition of walls, sources of interference as well
as the transmit / receive properties of the terminal device.
Once it has been activated, Bluetooth
nitely as the radio system is designed with exceptionally low power
consumption.
function that enables
®*
connection are
®*
connection with
®*
remains switched on indefi-
®*
®*
13
EN