Care And Maintenance; Storage And Transport - Black Diamond Jetforce Instrucciones De Uso

english
attention. To troubleshoot the system, follow these steps in
order. Check for normal operation after each step:
1. Turn the system off for 2 minutes, then turn it back on.
2. Check the battery charge. Recharge it if necessary.
3. Connect the Charging Plug (1h) to the Charging Power
Supply (1p) for 2 minutes and disconnect.
4. Confirm that battery attachment screws are tight.
5. Disconnect the battery, wait 2 minutes, reinstall the
battery then wait 2 minutes.
6. If the Deployment Handle (1c) still shows flashing red
lights or no lights contact your pack manufacturer's
customer service center for assistance.
During charging, a flashing red light or solid red light on the
JetForce System Status Lights (1e) indicates a charging system
error. Follow these steps:
1. Unplug the Charging Power Supply (1p).
2. Ensure that the correct power supply is being used.
3. Wait 2 minutes. (The temperature must be within the
allowable charging range. )
4. Plug in the Charging Power Supply to restart the
charging cycle.
5. If you continue to get an error light, discontinue charg-
ing and contact your pack manufacturer's service center.

CARE AND MAINTENANCE

The JetForce Backpack must not come into contact with
corrosive materials such as battery acid, battery fumes, solvents,
chlorine bleach, antifreeze, isopropyl alcohol or gasoline.
If you need to clean your pack, use a damp cloth and mild
detergent to spot clean the specific area. Take care to not get
the pack overly wet. When finished cleaning, open any affected
pockets, hang the pack, and allow to air dry prior to use.
6
Do not crush, puncture or subject the battery to excessive
mechanical shock or vibration.
Inspect the Lithium-Ion Battery (1g) regularly for cracking,
swelling or other physical damage and replace damaged
units immediately.
The JetForce battery has been engineered to perform optimally
at very cold temperatures and has an internal charging circuit
that maintains the health of the battery; however, all Lithium-
ion batteries, no matter how well they are controlled, are
subject to deterioration over time and with use. Storing the
battery for a long period of time at full charge and/or at high
temperatures are the easiest ways to permanently decrease the
capacity and health of the battery. Additionally, do not allow
your battery to deep discharge. Running the system when the
battery is showing no blue lights may damage the battery.
Battery health can be greatly extended by doing the following:
1. Disarm the system whenever not in avalanche terrain.
2. Charge the battery frequently during normal, regular
use. As with all Lithium-Ion batteries, it is ideal to
maintain the charge at 75-100% when being used
regularly. Avoid full discharge.
3. Store the JetForce pack in a cool, dry environment at
50-75% battery charge when not being used regularly.
4. While the overall system will function up to 45° C [113°F],
battery deterioration is accelerated at temperatures
higher than 23°C [73°F].
5. It is possible to measure the health of your battery with a
calibration routine. Please visit your pack manufacturer's
website or customer service center for further details.

STORAGE AND TRANSPORT

Storage
Always store the JetForce Backpack and all components (battery,