Eminent myiSharing NAS EM4172 Manual De Usuario página 22

4. Now take the hard disk(s) you want to use. If you take a look inside the casing,
you will see the SATA connectors. Point the SATA connector of the hard disk
towards the SATA connector inside the casing. Carefully slide the hard disk into its
position. If you want to mount an extra hard disk, repeat the procedure above.
Also refer to the following image:
5. Once you are done mounting the hard disk(s), you need to close the casing again.
Place the front panel back onto the casing and tighten the screw at the bottom of
the front panel again. Also tighten the supplied HDD screws to fix the mounted
hard disk(s). Also refer to the following image:
5 |
ENGLISH