Operating Your Freezer - Haier HUF138PA Manual Del Usuario

Operating Your Freezer

Temperature Control Dial (fig. 1)
• The temperature control dial has settings from "0" to "7" with
"1" being the warmest and "7" being the coldest.
• Initially, set the temperature control dial at "4".
• After the freezer has been turned ON for 24 hours, adjust the
temperature control dial to the setting that best suits your
needs.
• Turning the temperature control dial to "0" will stop the
cooling cycle but will not shut OFF the power.
Note: If you unplug or turn OFF the freezer, wait at least 4 minutes
before restarting or plugging it in again.
Temperature Alarm System
When turning ON your freezer, the temperature alarm system switch should be at
the "O" position. Put it in the "-" position once the freezer has been ON for a peri-
od of 24 hours. The temperature alarm is activated at 15.8˚F. Once activated, the
built-in audible alarm system will signal a warning to you. The alarm will continue
to sound until you turn OFF the temperature alarm switch. A red light will also warn
you that the temperature alarm system has been activated.
Lock and Key (fig. 2)
Your freezer has a lock and key feature to secure the contents of the freezer. Close
the door, push and turn the key to lock. Push and turn the key in the opposite
direction to unlock.
Lock and Key
Temperature
Control Dial
fig. 2
English
fig. 1
7
8