Operating Your Freezer; Defrosting And Draining - Haier HF71CL53NW Manual Del Usuario

Ocultar thumbs Ver también para HF71CL53NW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating Your Freezer

• Once the freezer is in its proper place, plug it in an electrical outlet
having 115 volts and 15 amps.
• Set the temperature, on the temperature control knob. "1" being the
warmest and "7" being the coldest. Initially set the temperature on
"4". Place food inside the freezer. After using the freezer for 24 hours
set the freezer to your desired setting.
• In case you unplug your freezer or experience an electrical outage,
allow 5 minutes before plugging it back in.

Defrosting and Draining

• For most efficient operation and minimum energy consumption, defrost
whenever the frost becomes 1/4" thick. Use only provided plastic
scraper. Do not use boiling water as it may damage the unit.
DANGER - Risk of Fire or Explosion due to puncture
refrigerant tubing. Flammable refrigerant used. Do not
use metal instruments to defrost freezer. Do not puncture
refrigerant tubing.
• Turn the temperature control to OFF position and unplug the unit.
Defrosting usually takes a few hours. To defrost faster keep the freezer
door open.
• For draining, place a tray beneath the outer drain plug. Unscrew and
remove drain plug. (See fig #4) This will let the water flow out in the
tray. When done, screw on the drain plug in place.
Note: monitor the container under the drain to avoid overflow.
• When draining is complete, wipe the interior of the freezer with a soft
cloth. Plug in power cord back into the electrical outlet.
• Reset the temperature control to the desired setting.
• Return the food into the freezer.
Maintenance
Risk of Fire or Explosion. Flammable refrigerant used. Do not puncture
of refrigerant tubing. To be repaired only by trained authorized service
personnel. Consult Repair Manual before attempting to service this
product. All Safety Precautions Must be followed. Component parts
shall be replaced with like components to minimize the risk of possible
ignition due to incorrect parts or improper service.
fig. # 4
English
8

Publicidad

Tabla de contenido
loading

Tabla de contenido