Adjusting The Handlebar To The Desired Position And Height - benza ER73AV2TE Información Para El Usuario

FIG. 2
Tank cap
Engine switch
· Always perform this task with the engine shut off.
· Do not overfill the fuel tank and always allow any spilt fuel to evaporate.
· Do not refuel in enclosed spaces.
· Do not smoke or light a fire nearby.
· Keep the petrol out of the reach of children
READ THE SAFETY INSTRUCTIONS (pp. 27 and 28)

ADJUSTING THE HANDLEBAR TO THE DESIRED POSITION AND HEIGHT

Before using the machine, always adjust the handlebar to the desired height, depending on the work to be
carried out.
The handlebar on this machine may be completely rotated (Position B see fig.4) so as to be placed on the oppo-
site side to the machine's starting position. The starting position on the machine positions the handlebar above
the agricultural wheels and the engine at the front. Position A (see fig. 3)
Use of the machine in the starting position A (fig.3) is recommended for working on bird bedding up to 12cm
thick.
Position B (fig.4) is recommended for further shredding bird bedding, in order to make it even finer. The working
thickness is the same as in position A.
FIG. 3
I
32
Information for users
Fuel tank
POSITION A
Air filter
FIG. 4
POSITION B