FASTBACK HARDCOVER GUIDE USER'S MANUAL, REV.:C 06/09/05
TROUB LE SHOOT ING
Tig hting the Clamp Asse mbly
In case the purple cover stops become loose they
can be easily retightened using the following method.
Insert a standard screwdriver into the small slot
under the hood of the cover stop, and gently turn
the screwdriver sideways. The hood will pop off
(Fig. 23).
23
F I G U R E
Inside the cover stop, you will see two screws.
With a Phillips screwdriver tighten the screws
carefully (Fig. 24).
CAUTION: Over-tightening the screws may damage
the Guide. Do not apply more pressure than is
necessary.
24
F I G U R E
11