Cleaning and
Maintenance
Your IVVI savi is a valuable piece of equipment and deserves careful
handling.
You can clean the frame, the plastic parts, and the fabric with a damp
cloth, but don't use abrasives or bleach. Fabric is machine washable.
Line dry. Do not use silicon lubricants, as they will attract dirt and grime.
Continued and extended exposure to sunlight can change the color of
many materials. Do not store your IVVI savi in a damp place. Always allow
the fabric to dry naturally away from direct heat.
For reasons of safety, only use original Nuna parts. Clean the wheels
regularly with water and remove the dirt. To ensure the long-lasting use of
your IVVI savi, wipe it off with a soft, absorbent cloth after using it in rainy
weather. It is normal for fabric to color from sunlight and to show wear and
tear after a long period of use, even when used normally. Check regularly
if any parts are torn, broken, or missing and that everything functions pro-
perly. If this is the case, stop using the IVVI savi.
• If the handle or arm bar material comes in contact with dust or water-
soluble liquid, e.g. juice or saliva, wipe it with a cloth dampened with
water at a temperature no greater than 40 degree Celsius and then air
dry.
• If the handle or arm bar material comes in contact with dust or non-
water-soluble liquid, e.g. milk and grease, wipe it with a cotton swab or
towel dampened with water and a neutral detergent at a temperature no
greater than 40 degree Celsius. Wipe residual detergent water off with
dampened cloth and air dry.
• To dry handle or arm bar if exposed to rain: Wipe water from the surface
and air dry. DO NOT dry it by hot surface or direct sunlight.
• DO NOT clean your product with strong cleaners or solvent as it may
damage the material.
• DO NOT expose your product to organic solvents like alcohol.
• DO NOT clean the handle or arm bar with water of temperature greater
than 40 degree Celsius.
22