Installing Dss Player Software - Olympus DIRECTREC DR-1000 Manual De Instrucciones

Installing DSS Player Software

Before you connect your Directrec to your PC, you must first install the
DSS Player software.
Make sure to exit all running applications, eject the floppy disk if you are
using one, and logon as administrator if you are running Windows 2000/
XP (Professional only) on the network.
1
Insert Olympus DSS Player CD into the CD-ROM drive.
The installation program will start automatically. Once the program starts,
jump to step 4. If it does not, follow the procedures in steps 2 and 3.
2
Click the [start] button and select [Run].
3
Enter "D:\setup.exe" in the [Open] field and click [OK] .
This is assuming the CD-ROM drive is D.
4
The installation Language Selection dialog box opens.
Click the desired language to select it.
Installing DSS Player
5
Register user information.
Enter your name, company name and serial number. For the serial num-
ber, see the label attached to the CD-ROM package provided with DSS
Player. When entered, click [Next]. When the confirmation dialog appears,
click [Yes].
6
Confirm your acceptance of the terms of the Licensing
Agreement.
You must accept the terms of the Licensing Agreement to install DSS Player.
If you accept them, click [Yes].
6