FujiFilm Instax mini LiPlay Manual De Instrucciones página 8

Simple Camera Care
EN
■ Camera Care
1. Do not open the film door until you have used up the
film; otherwise, the rest of the film is exposed and
turns white and the film can no longer be used.
2. Your camera is a fragile object. Do not expose it to water,
sand or gritty materials and do not drop.
3. Do not use a strap made for cellular phones or other
similar electronic products. These straps are usually
too weak to hold your camera securely. For safety, only
use straps designed for your camera, and use only as
specifically intended and instructed.
4. Do not use solvent such as thinner or alcohol to remove
dirt.
5. Do not leave your camera in direct sun, or hot places
such as a car. Do not leave it in damp places for long
periods.
6. Moth repellent gas such as naphthalene may affect your
camera and prints. Be careful to keep your camera and
prints in a safe, dry place.
7. Note that the temperature range within which your
camera can be used is +5 °C to +40 °C.
8. Take great care to ensure that printed materials do not
violate copyright, image rights, privacy or other personal
rights and do not offend public decency. Actions that
violate the rights of others, are contrary to public
decency or constitute a nuisance may be punishable by
law or otherwise legally actionable.
■ Handling the LCD Monitor
As the LCD monitor can be easily scratched or damaged
by sharp or solid objects, we recommend you attach a
protective sheet (commercially available) onto the monitor.
8
■ Charging the Battery
The battery is not charged at shipment. Charge the
battery completely before use.
Charge the battery using the supplied USB cable. Charging
times will increase at ambient temperatures below +10 °C
or above +35 °C. Do not attempt to charge the battery at
temperatures above +40 °C or at temperatures below +5 °C
as the battery will not charge.
■ Battery Life
At normal temperatures, the battery can be recharged
about 300 times. A noticeable decrease in the length of time
the battery will hold a charge indicates that it has reached
the end of its service life.
■ Cautions: Handling the Battery
The battery and camera body may become warm to the
touch after extended use. This is normal.
■ Certification marks acquired by the camera are located
inside the film chamber.
■ Cautions During Printing