Oven Lights; Troubleshooting - Whirlpool WOCA7EC0HZ Instrucciones Para El Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OVEN RACKS
Cleaning Method:
Steel-wool pad.
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
OVEN CAVITY AND OVEN DOOR INTERIOR
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
Self-Cleaning cycle:
See the "Self-Cleaning Cycle" section first.
For optimal door cleaning results, wipe away any deposits with
a damp sponge before running cycle.
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call,
refer to the warranty page in this manual, or visit producthelp.whirlpool.com. In Canada, visit www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
Problem
Nothing will operate
Oven will not operate
Oven temperature
too high or too low
Display shows
messages

TROUBLESHOOTING

Possible Causes and/or Solutions
Oven isn't wired properly: See the Installation Instructions.
Household fuse is blown, or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
Control Lock is on: "Control Lock" will display on the screen. Scroll up to unlock.
Sabbath Mode is set: See the "Sabbath Mode" section.
On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other
oven cannot be set or turned on.
Oven temperature needs adjustment: See the "Temperature Calibration" section.
Power failure: On some models, reset the clock if needed. See "Preferences" in the "Tools" section.
Error code (display shows letter followed by number): Press the Cancel keypad to clear the display. If it
reappears, call for service. See the "Warranty" section for contact information.
Demo Mode (product is in Demo Mode): See the "Tools" section to exit Demo Mode.

Oven Lights

The oven lights are 120-volt, 40-watt maximum halogen bulbs.
They will come on when the oven door is opened. On double
oven models, the lights will only come on for the oven
that has the door open. The oven lights will not work during
the Self-Cleaning cycle.
When the door is closed, touch the appropriate Oven Light
keypad to turn on the oven light.
To Replace:
Before replacing the bulb, make sure the oven is off and cool.
1. Disconnect power.
2. Remove glass light cover by grasping the front edge
and pulling away from oven.
3. Remove bulb from socket.
4. Replace bulb using tissue or wearing cotton gloves to handle
bulb. To avoid damage to or decreasing the life
of the new bulb, do not touch bulb with bare fingers.
5. Replace bulb cover by snapping back into wall.
6. Reconnect power.
IMPORTANT: Do not use bulbs rated higher than 40 watts.
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido