Care And Cleaning - Kohler K-9245 Manual De Instrucciones

Operation
Set your music device to a midrange volume before connecting to the wireless speaker.
Press the power button for 1 second to power the wireless speaker ON or OFF.
The light will blink blue to indicate pairing mode.
Pair with your BLUETOOTH
solid blue when connected.
NOTE: If pairing is lost, the wireless speaker will power OFF after 90 seconds.
Use the USB cable provided to recharge.
LED Status – Operating Mode
Blue blink = BLUETOOTH pairing mode
Blue = Connected to a BLUETOOTH device
Blue/red blink = Connected to a BLUETOOTH device. Battery is low.
LED Status – Charging Mode
Red blink = Battery is charging
Red = Battery recharge is complete

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:
• Use a mild detergent such as liquid dishwashing soap and warm water for cleaning. Do not use
abrasive cleaners that may scratch or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the material.
• Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
• Do not allow cleaners to sit or soak on the surface.
• Wipe surfaces clean and rinse completely with water immediately after cleaner application. Rinse
and dry any overspray that lands on nearby surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring
pad to clean surfaces.
For detailed cleaning information and products to consider, visit www.kohler.com/clean. To order Care &
Cleaning information, call 1-800-456-4537.
1199729-5-D
Power/LED
device. If a password is required, enter "0000." The light will turn
®
USB Input
5VDC, 1.2 A
4 Kohler Co.