Troubleshooting Table - Kohler K-9245 Manual De Instrucciones

Troubleshooting (cont.)

Troubleshooting Table

Symptoms
1. After playing music loudly,
the music stops even
though a song is properly
selected.
2. The status LED is not
illuminated.
3. No sound plays through the
speaker.
The wireless speaker is not
4.
connecting to my
BLUETOOTH device.
®
5. LED does not blink red
when charging.
1199729-5-D
Probable Cause
A. Thermal shut down.
A. Battery is not charged.
A. The song is paused.
B. The volume is too low.
A. The BLUETOOTH device is
not within range.
B. The volume is too low.
C. The BLUETOOTH device is
not paired with the wireless
speaker.
D. The BLUETOOTH requires
password entry for pairing.
A. USB connection to the wireless
speaker may be loose.
B. No power to the USB port.
6
Recommended Action
A. Shut down the system for 1 hour
to allow the unit to cool. Make
sure the area where the unit is
installed does not exceed 140°F
(60°C).
A. Use the USB cable provided to
recharge the battery.
A. Make sure a song is playing. If the
song is paused, press the resume
feature to continue playback.
B. Make sure the volume is turned up
high enough for proper enjoyment.
A. Make sure the BLUETOOTH
device is within range of your
wireless speaker.
B. Make sure the volume is turned up
high enough for proper enjoyment.
C. Pair your BLUETOOTH device
with the wireless speaker
according to the pairing
instructions for your BLUETOOTH
device.
D. Enter "0000" for the password.
A. Check the USB connection to the
wireless speaker and reconnect if
needed.
B. Make sure there is power to the
USB cable.
Kohler Co.