Before First Use; Assembly Of The Cordless Sweeper - Silvercrest SABD 3.7 LI D4 Instrucciones De Uso

WARNING! RISK OF INJURY!
This product contains rechargeable batteries . Do not throw the
►
batteries into a fire and do not subject them to high temperatures .
There is a risk of explosion!
Do not use the appliance as a toy .
►
Never leave children unsupervised in the vicinity of the appliance!
►
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
►
(Type ZD006C053050EUE)!
Only this cordless sweeper may be charged with the supplied
►
battery charger; the charger is not suitable for other batteries .
Never attempt to recharge non-rechargeable batteries .
►

Before first use

■ Remove the packaging material from the
appliance including the plastic cap 8, which
safeguards the on/off switch 6 from
unintentional pressure during transport .

Assembly of the cordless sweeper

■ Attach the handle 2:
–
Fit the 3 handle elements 2 together by
pushing the push-in connection into the
handle . Press the knob 4 on the push-in
connection inwards and push it into the
handle so that the head 4 engages in
the recess on the handle 5 . The handle
elements 2 are now firmly fixed together
(see Figure B on the foldout page) .
–
Push the assembled handle 2 with the
push-in connection into the holder 3 on the
appliance and rotate the handle until it
engages .
■ Fitting the dirt container 0 on the appliance:
■ 34 │ GB │ MT SABD 3.7 LI D4