Technical Specifications - Chicco Essential Digital Audio Baby Monitor 06607 Instrucciones De Uso

Remove the run out rechargeable battery (13) and
replace with another rechargeable battery that is
identical to the 3.7V 800mAh supplied with the
product (code 20256400100 to be requested
directly from Artsana S.p.A.) taking care to place
them with the correct insertion polarity indicated
on the battery compartment.
Reposition the battery compartment closing
panel (9), first inserting the lower panel hooks in
their battery compartment housing and gently
pushing the panel toward the product (fig.4).

TECHNICAL SPECIFICATIONS

Child unit (primarily in transmitter mode)
Mod. 06607
Power:
Internal: TWO 1.5V AAA/LR03
BATTERIES
External: via 100-240V~ 50/60Hz /6V
500mA mains switching adapter
Transmission:
• Transmission frequency band: 2400-2454 MHz
• Signal strength: 100mW max
Parent unit (primarily in receiver mode)
Mod. 06607
Power:
Internal: 3.7V 800mAh LITHIUM-ION BATTERY
External: via 100-240V~ 50/60Hz /6V
500mA mains switching adapter
Lithium-ion battery charging via 100-240V ~
50/60Hz /6V 500mA mains switching
adapter
Reception:
• Transmission frequency band: 2400-2454 MHz
• Signal strength: 100mW max
Mains adapter
Mod. S003IV0600050
INPUT: 100-240V ~ 50/60Hz 150mA
OUTPUT: 6V 500mA
Plug polarity:
Made in China
Lithium-ion battery
Mod. MB1022 (ICP46/34/46)
Nominal capacity: 800mAh (2.96Wh)
Nominal voltage: 3.7V
Lithium batteries give best performance when
used at normal room temperature (20°C±5°C)
Made in China
SYMBOLS KEY
ALKALINE
24
monophase alternate current
direct current
for indoor use only
Class II -
double insulation equipment
Conforms to applicable EC
directives and subsequent
amendments
ATTENTION. Read the instructions
for use
TRO
If yo
• Bo
• Bo
cha
FA
Th
un
ch
(t
po
an
in
lig
is
Th
(r
no
so
In