Measurement Mode - RS Pro RS-9883M Manual De Instrucciones

6 in 1 Particle Counter / English

6-Measurement Mode

This instrument has four modes.
On the power on mode, the unit will display the four measure modes,
and display four setup options.You can use or
measure mode you need and use function button F1,F2,F3 to enterthe
system interface.
Items Description
Particle Counter measurement
HCHO Detector measurement
TVOC Detector measurement
CO Detector measurement
2
Memory set
System set
Help file
Symbol Description Symbol
Cumulative mode
Concentration mode
HOLD
CAM mode
Video mode
TVOC detection mode
4
button to select any
Description
Differential mode
Scan
Alarma working
CO detection mode
2
HCHO detection mode
05/04/2018 Version No. 001
7-Particle Counter Measurement Mode
On the power on mode, you can use the or button to select
to enter the Particle Counter mode, Start to measure and display temperature and humidity.
Press RUN/STOP button to start detection of particles, When the sample time is up, the particle
measurement will automatically stop, and the data will automatically save. You can also press RUN/
STOP button to stop the measurement when the sample time is not up. This mode can take picture and
video.
7-1.Take Picture Function
On the particle counter mode, you can see
to F1,F2,F3 button. Press F1 button to enter picture taking,
you can press F2 button to take picture. Press ESC button to exit this mode.
7-2.Take Video Function
On the particle counter mode, you can see
to F1,F2,F3 button, press F2 button can enter video taking mode. Press the RUN/STOP button
to start the particle measurement, the instrument start to measure the particle, The LCD display
icon, press F2 button to take video and press F2 button again to stop take video,
The video file will be auto to saved. Press ESC button to exit this mode.
05/04/2018 Version No. 001
6 in 1 Particle Counter / English
, then press the ENTER button
icon, and these icon corresponding
icon will appear,
icon, and these icon corresponding
5