RS Pro RS-9883M Manual De Instrucciones página 5

6 in 1 Particle Counter / English
7-3.Particle Setup Mode
On the particle counter mode, you can see
F1,F2,F3, press F3 can enter the Setup mode, on this mode, you can setup any parameter you want.
Use the or button to select any option you want to setup. Then press ENTER button to confirm the
parameter.
7-3-1.Sample Time
You can adjust the sample time use the or button to control the volume of measured gas.
It can be set to 60s/2.83L.
7-3-2.Start Delay
You can adjust the time use the or button to control start time. The delay time of up to 100 seconds.
6
icon, and these icon corresponding to
05/04/2018 Version No. 001
7-3-3.Channel Display
This setting to select the channel is being displayed. Use the
ENTER button to confirm.
7-3-4.Ambient Temp/%RH
Choose this seting if the Air temperature and humidity are displayed.
7-3-5.Sample Cycle
This option is used to set the sampling period.
05/04/2018 Version No. 001
6 in 1 Particle Counter / English
or button to select channel and use
7