RS Pro RS-9883M Manual De Instrucciones página 9

6 in 1 Particle Counter / English
• Max/ Min
Set whether to display the measured maximum or minimum.
• Average/ Dif
Set whether to display the value of average/ dif.
• Ambient Temp/%RH
Set whether to display the air temperature and relative humidity.
• Dewpoint/ Wetbulb
Set whether to display the dewpoint and wetbulb.
• Units (ppm/ mg/m 3 )
14
10-CO Measurement mode
2
On the power on mode, you can use the
enter the CO
seconds. Press RUN/STOP button to stop or open the measurement. This mode can take picture and take
video.
10-1.Take Picture Function
On the CO
button, press F1 can enter picture taking mode.
button to take picture. Press ESC button to exit this mode.
10-2.Take Video Function
On the CO
button, press F2 can enter video taking mode, Press the RUN/STOP button to start the CO
measurement, The LCD display
button again to stop take video, The video file will be auto to saved. Press ESC button to exit this mode.
05/04/2018 Version No. 001 05/04/2018 Version No. 001
or button to select
measure mode, Start to measure CO , air temperature and humidity after clearing a few
2 2
mode, you can see icon, and these icon corresponding to F1,F2,F3
2
mode, you can see icon, and these icon corresponding to F1,F2,F3
2
icon, press F2 button to take video and press F2
6 in 1 Particle Counter / English
,then press ENTER button to
icon will appear, you can press F2
2
15