Koblenz BP-1400 Instrucciones De Operación página 4

OPERATION INSTRUCTIONS
Please read the following operating instructions carefully. They
will help you to get the best performance from this professional
quality vacuum cleaner and to maintain it in optimum
condition.
Follow these simple steps for easy and effective
operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is correctly located
and the flexible ring provides a proper seal when the lid is closed.
For optimum filtration and maximum hygiene, it is advisable to
use a paper vacuum bag in addition to the standard cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth
bag, making sure that the cardboard disk is centered on the
flexible sealing ring. When you replace the lid, the short nozzle
in the center of the lid will be forced into the central hole of the
cardboard disk of the paper vacuum bag thus providing a tight
seal. Make sure the paper vacuum bag is tightly secured over
the short nozzle before vacuuming.
Lock the lid down with the two latches. Always ensure that
the vacuum bag is empty before vacuuming. Your Backpack
vacuum has been fitted with a thermal overload switch to protect
the motor against damage should the airflow be blocked for
extended periods. This may occur if the vacuum bag is overfull
or if the vacuum hose is blocked. The vacuum motor will stop
before it can get too hot. If this happens, empty and thoroughly
clean the vacuum bag or free any blockage and ensure that
adequate airflow is restored. The
restart after it has cooled to a safe operating temperature.
. The vacuum hose is fitted into the cuff in the lid. It should not
be necessary to remove the hose in normal operation.
2. Place the Backpack vacuum on your back, adjust the
shoulder straps until you feel comfortable and then tighten the
waist belt. The Backpack vacuum is designed to ride higher on
your back for maximum comfort.
3. Plug the cord into a 110 volt, grounded outlet. Always
unwind the cord completely before vacuuming. It is important
to maintain the power cord in good condition. This unit ships
with a 50' 16AWG x 3 conductor SJT extension cord. Always
use a 16x3 SJT extension cord when operation this unit.Use
care when pulling the cord around sharp edges and through
doorways.
Never operate the Backpack vacuum if the
power cord is damaged in any way.
4. Attach the extension wand to the hose and fit the floor tool or
any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The toggle switch is located on the
switch box. You may clip the switch box to the waist belt.
4
motor will automatically
HOW TO REPLACE THE PAPER BAG
Turn off main power
switch and unplug
unit from wall outlet.
Remove vacuum
hose from top of unit.
Release the two latches
and lift off lid.
Separate lid from
paper bag insert
and dispose of
paper bag.
Remove cloth filter
bag, clean, dust
and replace.
Insert new paper
bag making sure
to align lid nozzle
with bag hole and
replace latches.