Sonedas 9688461 Manual De Instrucciones página 12

OPERATION
The fan may be operated by the manual controls located on the fan (as shown in Fig. 3) or by your
remote control (shown in Fig. 2).
(Fig. 3)
1. Place the FAN on a stable flat surface. Plug the cord set into a 230V~A.C. electrical outlet.
2. POWER: Turn the FAN on by pressing the 'POWER' button; Turn the FAN off by pressing the
'POWER' button again.
3. SPEED: You can adjust the fan speed to the desired level: low, medium, or high by pressing
'SPEED'. The speed setting is displayed on the LED screen (shown in Fig. 4).
4. MODE: Pressing the "MODE" button will set the FAN into NORMAL, NATURAL, and SLEEP mode.
5. TIMER: The fan is equipped with a timer that allows you to set its length of operation from 1
hour to 12 hours.
6. OSC: Pressing the 'OSC' button will start and stop the oscillation function. The symbol is
displayed on the LED screen.
7. TEMP: Once the unit plug into the power socket or switch on, the LED will show the room
temperature, and the 'TEMP' will change to 'TIMER' when the timer is set.
8. Power save mode: when the 'sleep' mode or the 'timer' is on, the main display and blue light
will be off after 30 seconds, and you can press any keys to turn on the display again.
9. Blue light: When the fan is on, the light will come on. Pressing "SPEED" button 3 seconds, the
light turn to off. Pressing "SPEED" button 3 seconds again, the light turn to on.
10. The back housing shall not dismantle, removal will be dangerous.
(Fig. 4)