Cleaning the brewing unit
Prerequisite: The appliance is switched off.
Note
For optimal protection of your appliance, we recommend that you clean
the brewing unit once a week.
•
Reach into the recess on the right side of the appliance (Fig. A, no. ) and
pull off the cover to the right.
•
Activate the red button on the handle of the brewing unit (Fig. B, no. )
and turn the handle clockwise to the stop (approximately 75°).
•
use the handle to pull the brewing unit out of the appliance.
•
Leave the brewing unit as it is (do not move or twist the components of
the brewing unit).
•
thoroughly rinse off the brewing unit as a whole from all sides under
running water. Particularly ensure that the surface shown in Fig. D is free
of coffee residue. Do not put the brewing unit in the dishwasher.
•
Let the brewing unit drip dry.
•
If necessary, remove coffee residues from the surfaces in the interior of
the appliance where the brewing unit is inserted.
•
Put the brew unit back into the appliance and turn the handle of the brew
unit anticlockwise to the stop to lock the brew unit.
•
Insert the four catches of the cover in the back of the appliance and swing
the cover to the left until it engages.
Heft_Lattea_EU.indd 67
09.07.2009 15:29:07