Foot Control; Installation - NSK Surgic Pro Manual De Operación

3-3 Foot Control

(b) PRG (Program) Button
(a) Coolant Solution Flow
Volume Button
released. To descend, press and hold for 1 second then release.
Speed Control Pedal
Use to start and stop the Micromotor and to control the speed during operation. The Micromotor operational speed is
Use to change the rotational direction of the Micromotor. Push once to change the rotational direction.

4. Installation

CAUTION
4-1 Connecting the Motor Cord
Align the [
Control Unit.
Push the Base of Motor Cord Plug into the socket until the
to disconnect the cord.
(c) Speed Control Pedal
] mark on the
Lock Joint
7
Foot Control Cord and Plug
(d) Forward/Reverse Button
[ ] mark
Fig.1