Keyboard Unit - Dreve Polymax 1 Instrucciones De Trabajo

Polymax 1, 1/120 °C, 3 and 5
5. Initiation
Before initiation make sure that the volt-
age indicated on the type plate meets
the voltage of the power source.
When selecting a suitable place for
the machine, please make sure that
the storage space is even, resistant to
splash water as well as sufficiently sta-
ble for a minimum weight of 21 kg.
Connect the unit to an air compressor.
For that purpose push the pressure hose
that is included in delivery onto the hose
clip (25) of the unit and fix it by means
of a hose clamp. Assemble the fast cou-
pling at the other end of the tube and
connect it with the pressure line.
The pressure of the compressed
air line must not exceed 10 bars.
38
Put the power cord into the female con-
nector (15) and create a connection
with the Euro/USA plug. Open the lid
(2) by means of the handle (1) and fill
the unit with water. (Maximum water
level: 30 mm below the upper edge).
Important: Before first initiation please
read the working instructions thor-
oughly. In case of comprehension prob-
lems contact your responsible dealer or
Dreve, if necessary.
Scope of delivery
1 Polymax
1 power cord
1 air connection hose incl. hose
clamps and fast coupling
1 water drain hose incl. coupling
1 working instructions in 5 languages

6. Keyboard unit

c
d
e
f
g
No. Description
a Manometer
b Adjustment knob
c LED – heating
d Temperature indication display
e Temperature switch
f Time indication display
g LED – polymerisation
h only Polymax 1/120 °C – lid opening control
a
b
h
39