Naxa NAS-5003 Manual De Instrucciones página 18

Operation after being added to the Wi-Fi network:
1. Connect your Mobile Device to the 2.4G Wi-Fi Network.
2. Power on the unit by pressing and holding the
unit until the Blue and Green Indicators on the top of unit illuminates and blinks.
3. Wait until the Green Indicator illuminates and blinks.
4. Wait a few seconds, the unit will automatically connect to the same Wi-Fi network.
The Green Indicator will stop blinking and audible prompt "Connected" will be heard.
5. Tap the "Naxa Resound " on your Mobile Device.
The following image will appear on the Mobile Device's screen:
6. Wait a few seconds, the following page will appear:
<
DEVICE LIST
50%
NAXA NAS-5003_XXXX
No song
Play All
18
/MODE Button on the top of the
LR