Power Supply; Checking Battery Status - Circutor MI20KVe Manual De Uso

3. Power supply

Internal rechargeable 12 V - 7 Ah battery.

3.1. Checking battery status

Battery measurement can be performed without interrupting high-voltage
generation, which will provide a better evaluation of the battery status, by
pressing the during the measurement. So, the battery
BATTERY CHECK
test is performed under actual consumption conditions and, for long last-
ing measurements, (i.e. Polarization Index), the evolution of battery status
can be checked without affecting the measurement. The meter pointer
should stop over the blue zone. If the pointer stops over the red zone this
means that the battery is discharged and shall be charged.
BLUE ZONE RED ZONE
28