KDP8 - 2/3 wires detector
Motion detector wall switch
FIG.7 is for single sensor wall switch replacing two-way switch:
Refer to the following diagram to wire KDP8, which includes an additional
jumper wire added to manual switch. Either by simply pressing manual switch
or triggering sensor ON, the connected lighting can be switched on for the
preset duration (It can be used in the staircase for example).
FIG.8 is for two sensor wall switches replacing two-way switches:
• Refer to the following diagram to wire KDP8.
• Either of two sensors is triggered on the connected lighting can be
switched on for the preset duration (It can be used in the staircase for
example).
Instructions manual |
KDP8-2H
KDP8-2H
24
KDP8-2H
www.grupotemper.com