Installation - HAMPTON BAY BPT18-34ALE-1 Guía De Uso Y Cuidado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation

1
Determining joist width
Measure the distance from the center of the two ceiling
joists where you will be installing the ventilation
fan.
2
Suspension bracket installation
For ceiling joist installations under 20 in., insert
suspension bracket I (D) into the fan body (A).
Proceed to step 3.
For ceiling joist installations between 20 in. and 24
in., insert suspension brackets I (D), II (E), and III
(F). Proceed to step 4.
NOTE: Sliding hanger bars are provided to allow for
accurate positioning of the main body between joists.
3
Joint installation under 20 in.
Use four long wood screws (BB) to attach the main
body of the fan to the ceiling joists.
Ensure the main body is level and square to the
joists.
Tighten all screws.
CAUTION: Do not mount the fan flush against the joist. The
flange should be flush with the ceiling board.
7
Please contact 1-877-527-0313 for further assistance.
www.hamptonbay.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bpt18-54al

Tabla de contenido