Mini-Dock Connectors - FujiFilm SonoSite Mini-Dock Manual De Usuario

2 Slide the mini-dock feet under the ultrasound system, and firmly press the mini-dock into the system
connector. The mini-dock is correctly attached when no gap is between the system and mini-dock.
Note If at any time the ultrasound system loses connectivity, turn off the system and
reattach the mini-dock and system. Always verify that the mini-dock and system are
correctly attached after changing a transducer. When you change a transducer, the
mini-dock may loosen.
To remove mini-dock
1 Grasp the handle on the ultrasound system and push back on the release lever.
2 Pull the ultrasound system forward.

Mini-dock connectors

Each connector on the mini-dock has a symbol that describes its use.
Table 1-1: Connectivity symbols on mini-dock
Symbol Definition
DC input
Print control
USB
Ethernet
RS-232 (DVD recorder, VCR, or bar code
scanner)
S-video out
Mini-dock connectors
2 1
Release lever
Symbol Definition
S-video in
DVI video out
Composite video out
Audio out
ECG/Footswitch
3