KENMORE ELITE PreView Grab-N-Go Manual De Uso Y Cuidado página 15

Removing the Right Door
1. Detach all the wire harnesses (1).
(1)
NOTE: The number of wire harnesses may vary
depending on the model.
2. Rotate the hinge lever (2) clockwise. Lift the top hinge
(3) free of the hinge lever latch (4).
CAUTION: When lifiting the hinge free of the latch,
be careful that the door does not fall forward.
3. Lift the door from the middle hinge pin and remove
the door.
NOTE: Place the door, inside facing up, on a
nonscratching surface.
Replacing the Right Door
Install the right-side door first.
1. Make sure that the plastic sleeve is inserted in the
bottom of the door. Install the refrigerator door onto
the middle hinge.
2. Fit the hinge (1) over the hinge lever latch (2) and slot
(4) it into place. Rotate the lever (3) counterclockwise to
secure the hinge.
(3)
(2)
3. Connect all the wire harnesses (4).
NOTE: The number of wire harnesses may vary
depending on the model.
15
REFRIGERATOR INSTALLATION
(1)
(2)
(3)
(4)