Pullout Drawer; Durabase; Durabase Divider - KENMORE ELITE PreView Grab-N-Go Manual De Uso Y Cuidado

PULLOUT DRAWERS
Top Drawer
1. To remove, pull the drawer out to full extension. On
the left rail, use a flat blade screwdriver to push in on
the tab to release the drawer from the rail, as shown
below. Once the left side is loose, push the tab on the
right side with your finger to release the drawer. Lift
the front of the drawer up, then pull it straight out.
2. To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push the drawer
back into place until you hear a click.
Middle Drawer
1. To remove, pull the drawer out to full extension. Lift
the front of the drawer up, then pull it straight out.
USING yOUR REFRIGERATOR
2. To replace, slightly tilt up the front of the drawer,
insert the drawer into the frame, and push it back into
place.

DURABASE

1. To remove the Durabase, push it to the back as much
as possible. Tilt up the front of the Durabase and pull
straight out.
2. To replace, insert the Durabase in the rail assembly.

DURABASE DIVIDER

The Durabase divider allows you to organize the
Durabase area into sections. It can be adjusted from side
to side to accommodate items of different sizes.
WARNING: If the Durabase divider is removed, there
is enough open space for children or pets to crawl
inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow children or pets to
touch or go near the drawer.
33
1
2