Important - PowerTap p1 Guia De Inicio Rapido

PEDAL INSTALLATION
IMPORTANT: Make sure cleats
engage and disengage properly
before riding.
4
CLEAT INSTALLATION
Note: PowerTap P1 pedals must be used
with the included cleats. They are NOT
compatible with other similar looking
cleats like Look Keo.
Align the holes on the cleat with the
embedded nuts on the sole of the shoe.
8mm
Next, install the rectangular washers
and bolts but do not fully tighten. Align
the cleat to your preferred position and
tighten each of the bolts to 4-6 ft lbs.