Battery Replacement - PowerTap p1 Guia De Inicio Rapido

6. BATTERY REPLACEMENT

To install or replace the battery use a
hex to remove the batter cover. Replace
battery in clean/dry conditions. Remove
old battery if necessary and replace with
new battery. Reference underside of pedal
for correct battery orientation. Reinstall
battery cover and do not overtighten.
IMPORTANT:
Ensure the o-ring
clears the outer
edge of the battery
compartment during
installation.
Damage caused by batteries is not covered under the warranty of the pedals. Remove batteries
from the pedal system if they will be unused for longer than a month. Use only lithium batteries
with the pedal system. Alkaline batteries could damage the pedals.
6
7. PRECAUTIONS
Avoid submerging pedals in water and
direct high pressure water spray. Damag-
ing chemicals like diesel, kerosene and
other strong solvents are also potentially
damaging.
WARNING: Keep pedals away from
strong magnets.
Some of the electronics inside the pedal
are sensitive to strong magnets. If your
pedals come in close contact with strong
magnets they may begin transmitting
abnormal data. If you think your pedals
were exposed to the magnetic field of a
strong magnet please contact customer
service.