1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
Product Information
Applicable product:
Drop-in bath whirlpool
Fixture*:
Bathing well:
Basin area, bottom
44" (111.8 cm) x 31" (78.7 cm)
Basin area, top
50" (127 cm) x 34" (86.4 cm)
Weight
110 lbs (49.9 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
69 gal (261.2 L)
* Approximate measurements for comparison only.
Pump:
V
1-speed
120
Included component:
Cut-out template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
1013768-1-C
12-5/16" (31.3 cm)
5-3/8" (13.7 cm)
17"
(43.2 cm)
Pump/Control Access
20" (50.8 cm) W x
15" (38.1 cm) H Min
(Typical)
3-1/2"
(8.9 cm)
1-1/2" OD
K-1246
Hz
A
60
7.5
113926-7
120 V, 15 A, 60 Hz
16-1/16"
(40.8 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
41 lbs/square foot (198 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
2
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
Recommended faucet area.
60" (152.4 cm)
1-3/16" (3 cm)
21"
(53.3 cm)
Kohler Co.