Adjusting The Air Flow Direction - Airwell RC08C Manual Del Usuario

OPERATIION
C) HOW TO SET A PROGRAM FOR DAILY ON AND OFF OPERATION
1. Press the TIMER button to select the desired timer.
2. Press the SET button till the ON sign blinks.
3. Press the + or - button until the desired valve is displayed.
4. Press the SET button to again, the OFF sign blinks.
5. Press the + or - button until the desired value is displayed.
6. Press the SET button to activatge the timer.
D) HOW TO CLEAR THE TIMER
1. Press the TIMER button to select the desired timer.
2. Press the CLEAR button if you want that every timer operation will be cleared.
NOTE:
If the procedure to set the timer is not completed by pushing
the SET button, within 15 seconds the timer operation will be
cancelledand the last set-up is restored.

ADJUSTING THE AIR FLOW DIRECTION

Press button to activate the supply aire flap to auto swing, if you push this button
again, the flap stops immediately.
Press button to activate the horizontal louver. If you push this button again to stop
it immediately.(Only for selected models)
11
Set vertical vanes to the front position during COOLING/DRY operation if humidity is
high.
If the vertical vanes are set to the left-most or right-most position, condensation may
form around the air outlet and drip off.
Do not move the flap with your hands when the air conditioner is running.
Use the button on the remote control to adjust the position of the flap. If
you move the flap by hand, the factual flap position and the flap position on the
remote control may no longer match. If this should happen, shut off the unit, wait
for the flap to close, and then turn on the unit again; the flap position will now
be normal again.
12
OPERATIION