Oxygen audio PULSION 12.1 Manual Del Usuario página 21

Proper ventilation
- Place the product in a sufficiently–aerated place to avoid overheating.
Allow at least 10cm spacing at the back and top of the product, and 5cm
spacing on both sides to prevent overheating.
- Do not place items such as newspapers, tablecloth, curtains, in front of the
ventilating openings.
Do not expose the product to high temperatures, moisture, water and
dust.
- The apparatus shall not be exposed to dripping or splashing. No object
filled with liquids, such as vases, shall be placed on the apparatus.
- Do not place other items close to this product that may damage it (for
example, objects containing water or lightened candles).
- No naked flame sources, such as lighted candles, should be placed on the
apparatus.
Electric supply
- Please unplug the product in case of prolonged non-use.
- If the supply cable is damaged, it must be replaced by the manufacturer or
qualified after-sales personnel to avoid any danger.
- This product must be connected to an electrical supply 230V ~ 50Hz.
- The mains plug is used as the disconnect device, so the disconnect
device shall remain readily operable
- Only use this product with the AC power cord provided.
- Do not use the product with a battery different from the one provided.
- CAUTION: Explosion risk if the battery is not replaced correctly. Do not
attempt to replace the battery with a different battery version.
- Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine or fire or any other heat sources.
- If after being charged, the battery autonomy is reduced by half, the user
must supervise the next charge. Caution, a damaged battery may cause a
dangerous thermal overheating.
- 20 -