Oxygen audio PULSION 12.1 Manual Del Usuario página 28

4. Connecting an audio device with Aux-in
1. Connect one end of the 3.5mm audio cable to the headphone output of your
MP3 player.
2. Connect the other end to the AUX IN input (3.5mm socket) on the amplifier
speaker.
5. Connecting to a second speaker
1. Connect one end of the 3.5mm audio cable to the AUX OUT output of the
amplifier speaker.
2. Connect the other end to the AUX IN input (3.5mm socket) of the other
speaker.
Note: If AUX cable is plugged to one end only and not plugged to another
device, it may cause buzz noise.
- 27 -